PROTECT YOUR EMPLOYEES WITH THE E-SAFE LOCK-A-PLUG

The E-SAFE "LOCK-A-PLUG" completely encloses the plug from any accidental reconnection. The electrical cable is inserted through the opening and then closed.

The single entry (LP110) or multiple entry (LP550) locking system aviods usage by unauthorized personnel during critical times. The E-SAFE is a practical and positive protection system. Made out of "Polypropylene" plastic, it is totally dielectric, resists cold or hot temperatures up to 300 °F / 149 °C, has a sliding closure and an integrated multiple lockout.

 

LP110

Will accept 110 volts and certain models of the 220 volt plug up to 1 3/4" x 1 3/4" x 3 1/4" (44.5 mm. x 44.5 mm. x 82 mm.) in size with a maximum cable diameter of 0.500" (12 mm.)

LP550

Will accept 220 volts and 550 volt plugs up to 3" x 3" x 6 3/4" (76 mm. x 76 mm. x 170 mm.) in size with maximum cable diameter of 1.000" (25 mm.)

THE ULTIMATE PROTECTION WITH THE E-SAFE LOCK-A-SWITCH
E-SAFE "LOCK-A-SWITCH" This easy to install device can be used with most mounted switches. It can be used to lock the switch in either the "on" or "off" position. (Install using existing screws). Standard package: 6 devices.

- Remove screws from switch plate.
- Adjust "E-SAFE" locking device over the switch plate and install it on switch.
- Position switch to desired position.
- Close "E-SAFE" device and put on your padlock and tag.

Line
Messenger
Phone
Messenger
Line
Phone